Ceramic Coating in Santa Rosa, CA
Protection
that lasts.
One of the best investments you can make in your vehicle.
An extra layer of clear coat
Think of a professional ceramic coating as an extra layer of clear coat that protects the paint beneath it.
Once applied and cured, the coating bonds to your paint and creates a slick, hard, glossy layer. Water beads up and rolls off, taking dirt with it, so the car stays cleaner longer and washes far more easily. It also adds depth and shine to the finish.
Coatings are an investment — the average job takes about 10 hours — but with the preparation we do, they last for years. It's by far one of the best things you can do for your vehicle.
A coating locks in what's underneath
Whatever is on the paint when the coating goes on stays under it. That's why the prep work is most of the job.
Wash & decontaminate
A thorough wash and decontamination to remove dirt, fallout and bonded contaminants.
Correct the paint
Paint correction as needed to remove swirls and scratches before they're sealed in.
Prep the surface
Panels are cleaned of polishing oils so the coating can bond properly.
Coat & cure
The coating is applied panel by panel, leveled, and left to cure.
What you get
- A protective layer over your clear coat
- Strong water beading and self-cleaning behavior
- Easier, faster washes
- Added depth and gloss
- Protection that lasts years, not weeks like wax
Simple care
Hand wash with a pH-neutral car soap and clean microfiber, and skip automatic brush car washes. Ask us for care tips when you pick up your car — we'll walk you through it.
Protect your paint for years
Tell us about your vehicle and we'll recommend the right coating package, including any paint correction it needs first.